Dremel 409 Cut-Off Wheel, 15/16 in Dia, 0.025 in Thick, Emery Abrasive paint--05-29-26 Tested to ASTM D-7088 Resistance

Tested to ASTM D-7088 Resistance to hydrostatic pressure at 15 psi and ASTM D6904 resistance to wind driven rain

5-3/4 in L Blade

No Adapters required

control and balance

The OAL is 8 in

Dremel 409 Cut-Off Wheel, 15/16 in Dia, 0.025 in Thick, Emery Abrasive paint--05-29-26 Tested to ASTM D-7088 ResistanceThis wheel for cutting metal with limited use on wood and plastic. Cut off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Mandrel fits all Diablo hole saws, from 5 8 to 6 in Dia Cuts only along its edge