Pay in 4 interest-free payments of $18.00 Learn more
Ships within 48 hours · Estimated delivery Aug 7 - Aug 12
Beam Clamp with 3/8" Tapped Hole - Electro-Galvanized joins strut channel and conduit to beam flanges
4-Hole Single Channel Post Base - Electro-Galvanized is a post base designed to fasten Strut Channel to the floor
Use approved nails or Strong-Drive structural screws as required
The FGTR can be installed in a single application or in pairs
fill the fastener hole(s) in the bottom of the hanger seat (THASR/L29 has one and all other models have two)
5/8" Simpson MCR06212 Rebar Cutter Metal To Wood Roofing Screws Beam Clamp with 3/8" TappedWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".
US$ 158.40
US$ 465.00
US$ 89.90
US$ 95.00
US$ 45.00
US$ 95.00
US$ 89.90
US$ 95.00
US$ 79.90
US$ 89.90
US$ 89.90